湖南萱洋偉業科技有限公司

產品分類
  • 傳感器
    流量傳感器
    液位傳感器
    感應傳感器
    溫度傳感器
    速度傳感器
    轉速傳感器
    負荷傳感器
    位移傳感器
    紅外傳感器
    溫濕度傳感器
    壓力傳感器
    振動傳感器
    角度傳感器
  • 儀器 | 儀表
    壓力表
    壓差表
  • 電工 | 電氣
    斷路器
    繼電器
    軟啟動器
    連接器
    按鈕及指示燈
  • 傳動 | 控制
    電機
    減速機
    保護與控制
  • 液壓 | 流體
    電磁閥
    比例閥
    止回閥
    安全閥
    流量閥
    波紋管閥
    過濾器
  • 真空 | 氣動
    風機
  • 實驗設備 | 耗材
  • 五金 | 工具
服務熱線
+86 199-188-33588
RDP位移傳感器 ACT LVDT
分享到:

RDP位移傳感器 ACT LVDT

 
產品保證
正品保證
快速發貨
產品介紹
編號 209-161 型號 ACT2000A
訂貨號 ACT1000C 產地 英國

ACT LVDT 位移傳感器





高精度
高周期壽命
無限分辨率
不銹鋼
image of ACT LVDT Displacement Transducer
這些轉導器用于位移/位置測量。他們準確測量了與位移傳感器主體相對的扶手(滑動部分)的運動。
此傳感器使用線性可變微分變壓器 (LVDT) 原理,這意味著它可能是可用的最堅固可靠的位置傳感器類型。LVDT 傳感器原理的強度在于傳感器位置感應元件之間沒有電氣接觸,對于傳感器的用戶來說,這意味著干凈的數據、無限的分辨率和很長的壽命。
此系列位移傳感器可作為無引導、俘虜或彈簧返回版本提供。











Unguided version.
On our ACT unguided LVDTs the armature assembly is a separate component, to make a measurement the user must guide the armature inside the body without touching the sides. Our ACT unguided position measurement transducers are appropriate where external guidance is available and give truly non-contact operation
Side (radial) exit cable.
dimensional drawing of LVDT unguided
A=9mm
D1=20.6mm
D3=4.75mm
D4=5.97mm
ID=6.8mm
TGF=M5x0.8
X=Centre of range


TypeRange Linearity error (% F.S.) LX (nom) Total weightArmature weightTFInward over-travel Sensitivity (nom)
ACT500±12.5mm±0.5/±0.25/±0.1127mm43mm170g17g15mm16mm0.7V/V
ACT1000±25mm±0.5/±0.25/±0.1155mm68mm227g23g15mm22mm0.9V/V
ACT2000±50mm±0.5/±0.25/±0.1270mm81mm320g37g15mm16mm1.5V/V
ACT3000±75mm±0.5/±0.25/±0.1380mm120mm454g55g15mm29mm1.5V/V
ACT4000±100mm±0.5/±0.25/±0.1427mm132mm568g71g15mm16mm3.2V/V
ACT6000±150mm±0.5/±0.25617mm183mm824g100g15mm16mm2.4V/V
ACT8000±200mm±0.5/±0.25808mm259mm1.2kg140g29mm27mm1.5V/V


Captive guided version.
Our ACT captive guided displacement transducer has bearings to guide the armature inside the measurement sensor. Our ACT captive LVDTs are for position measurement applications where guidance may be poor and end bearings may be required.
Side (radial) exit cable.
dimensional drawing of LVDT captive guided
A=24mm
D1=20.6mm
TGF=M5x0.8
TGR=M5x0.8
TR=11mm
X=Centre of range







TypeRange Linearity error (% F.S.) LX (nom) D3Total weightTFInward over-travel Outward over-travel Sensitivity (nom)
ACT500C±12.5mm±0.5/±0.25/±0.1152mm38mm4.75mm284g15mm10mm12mm0.7V/V
ACT1000C±25mm±0.5/±0.25/±0.1180mm63mm4.75mm340g15mm13mm10mm0.9V/V
ACT2000C±50mm±0.5/±0.25/±0.1295mm76mm4.75mm511g15mm10mm14mm1.5V/V
ACT3000C±75mm±0.5/±0.25/±0.1406mm114mm4.75mm653g15mm24mm15mm1.5V/V
ACT4000C±100mm±0.5/±0.25/±0.1452mm127mm4.75mm710g15mm8mm14mm3.2V/V
ACT6000C±150mm±0.5/±0.25643mm178mm4.75mm1.0kg15mm12mm17mm2.4V/V
ACT8000C±200mm±0.5/±0.25833mm254mm4.75mm1.4kg32mm22mm25mm1.5V/V
ACT10000C±250mm±0.5/±0.251030mm305mm4.75mm1.6kg27mm34mm35mm2.0V/V
ACT15000C±380mm±0.51435mm406mm4.75mm2.1kg19mm13mm13mm3.2V/V
ACT18500C±470mm±0.51702mm508mm6.00mm2.5kg27mm5mm33mm3.6V/V



Spring return version.
Our ACT spring displacement transducer has bearings to guide the armature inside the measurement sensor and a spring which pushes the armature to the fully out position. Our ACT spring return LVDTs are appropriate where it is not possible to connect the transducer armature to the moving component being measured.
Side (radial) exit cable.
dimensional drawing of LVDT spring return
A=9mm
D1=20.6mm
D3=4.75mm
X=Centre of range









TypeRange Linearity error (% F.S.) LX (nom) Total weightSpring force at XSpring rateInward over-travel Outward over-travel Sensitivity (nom)
ACT500A±12.5mm±0.5/±0.25/±0.1133mm38mm184g1.3N0.2N/cm1mm13mm0.7V/V
ACT1000A±25mm±0.5/±0.25/±0.1161mm63mm227g2.0N0.3N/cm3mm10mm0.9V/V
ACT2000A±50mm±0.5/±0.25/±0.1276mm75mm398g1.8N0.2N/cm8mm14mm1.5V/V
ACT3000A±75mm±0.5/±0.25/±0.1387mm114mm483g6.0N0.4N/cm15mm15mm1.5V/V



Specification
Excitation/supply (acceptable)0.5V to 7V rms, 2kHz to 10kHz (sinusoidal)
Excitation/supply (calibrated)5V rms, 5kHz (sinusoidal)
Linearity error (Standard) ±0.5% F.S.
Linearity error (Optional on some models)±0.25% F.S.
Linearity error (Optional on some models)±0.1% F.S.
Temperature coefficient (span) ±0.01% F.S. /℃ (typical)
Operating temperature range -50℃ to 125℃
Electrical termination2m (integral cable) Longer available to order.







免責聲明:內容來源于網絡收集整理,僅供參考;本站僅僅是為了更好地提供歐美MRO工業品備件產品信息,方便用戶查找、認識歐美工業備品備件。文中涉及的品牌、商標所有權、型號解釋權都?xì)w原廠商所有。

地址:湖南省長沙市望城區灣田國際五金機電城B18棟106-107號

Add:B18 Building 106-107,Wantian Mechanical & Electrical Market,Wangcheng District,Changsha,Hunan,P.R.C

電話/Tel:+86 731-85506544          傳真/Fax:+86 731-86887644

手機/Mobile:+86 199-18833588   郵箱/Email:bingyu.yi@xy-et.com


本網站中涉及的品牌、商標所有權、型號解釋權都?xì)w原廠商所有。